Nowadays the need for effective home plumbing is on the rise. The demand for products and equipment leads to some very innovative techniques that you can do yourself. Now is your chance to find something that works for your plumbing system. Here are some tips that you can use to get you started with doing your own plumbing.
Do not fall for the idea that liquid grease can be easily washed down the drain with hot water. While the grease may flow past the initial drain with the water, it does not take much of a temperature change as it moves through your pipes to alter from liquid to solid. The repeat habit of dumping grease in the sink is a sure-fire way to ensure a hard-to-reach clog forming in the future.
Certain things shouldn’t go into your plumbing system. By knowing what you can and cannot flush or throw into the garbage disposal and sink, you can save yourself from a costly repair or disaster. A plumber can usually get your plumbing back into working condition, but can be avoided if you know how to dispose of items correctly.
Got a leaky pipe? In many cases you can repair this yourself without the expense of a plumber. If a joint is leaking, tighten it with a pipe wrench. If the leak is coming from a damaged section of pipe, you can try repairing with a store-bought patching kit. One method involves applying waterproof tape to the section of pipe where there is leakage. Before applying the tape, make sure the pipe is thoroughly dry. Make sure that the tape covers two to three inches on either side of the breakage in the pipe.
Keep your bathtub drain running well by pouring a cup of baking soda followed by a cup of vinegar down the drain each month. Cover it with a plug or rag, since a chemical reaction should happen in the pipes. Wait for a little while, and then pour boiling water down the drain. Doing this will clear your pipes of any soap scum or hair that has accumulated.
Have you tried patching your pipe with the store-bought patching kits only to have that section of your plumbing continue leaking? Replacing the damaged pipe is a more permanent solution than patching. First, you must shut off the main water valve, and drain the water from the damaged section. Cut out the damaged section of the copper pipe, leaving about an inch of extra pipe on both sides of the damaged area. Remove corrosion from inside the pipes with a wire brush. Apply flux to the replacement pipe and the remaining pipe. Slide the piece of replacement pipe into place with couplings. Apply solder all around the joint, and use a propane torch to solder the replacement section into place.
As you have read, there are many different ways to deal with and maintain your own plumbing. You need to find the treatment that works for you. There is a ton of information that can help you get started. By following these tips, you are well on your way to doing your own plumbing like a pro.